These pages contains some of the modifications I've made to modules in my Synthesizers.com systems. Most of the modifications involved nothing more than installing toggle switches at key locations. You may find these and other module modifications at Synthesizers.com WIKI Modifications. The initial goal was to allow 'presets' to be used for live performance, whereby patches could be set-up in advance, then switched on/off, or various control-voltages routed to various locations, but easily altered or used 'on-the-fly'. The modifications, once installed, proved to be quite invaluable in the studio as well, allowing instant patch changes ' on-the-fly', while recording. Inserting switches to jacks should always be done at the 'tip' wire, not the 'ground' wire. For reversible pots, the center wire is used, and normal pots, the hot wire... not the ground.

Join the Synthesizers.com User's Group on Yahoo